Today Review Aegis Boost Pod kit with Replacement RBA Pod, The lightest yet the toughest Pod Mod, supports the usage of both Pod and RDTA up to 40W max output with an internal 1500mAh battery.
Dimensions: 105/109 x 40 x 27mm
Weight: 102.5 / 124g Case
Material: Zinc Alloy + Plastic + Silicone
Power: Built-in 1472mAh
Chipset: AS Multi-Mode
Cartridge capacity: 3.7ml
Evaporator resistance: 0.4 / 0.6Ω / RBA
Output power: 5 – 40W
Voltage range: 1.0 – 6.0V
Operating mode: POWER
Supported resistance: 0.2 – 3.0Ω
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
Micro-USB port / charging: yes, charging current 1.5A
Color: see photo below
– Aegis Boost mod
– hygienic cap
– additional drip type
– replaceable cartridge (pre-installed)
– replaceable evaporators 2pcs 0.4 / 0.6Ω (one pre-installed)
– USB cable
– user manual
– warranty card
The first impression is traditionally cute and original, convenient and quite high quality. Yes, I, as always, have no complaints about the quality of workmanship – geeks are able to make both beautifully and soundly.
The dimensions are small, but if we only compare our hero with a full-fledged one-janitor. In the context of newfangled sub-modes, it is also not large. And only in comparison with the podiks, he, of course, is a horse. Our guest, as always, is protected on all fronts – IP67 – from moisture, dust and wear. However, the silicone case, which has become familiar to the Aegis line, collects all the garbage that can only be “carried away”.
Just a few words about ergonomics – it is worthy. Only the low-set fire button separates it from the excellent one. But, alas – such is the constructive – we absorb and move on. In general, the anatomical notches and small dimensions did the trick – it’s nice to hold it. The weight is very small – it is almost not felt in the hand.
We start with the complete cartridge. Two types of drips are offered, both of them are removable, landing is your own. The bandwidth seems to be different, and the profile is different. By the way, the flattened version can be rotated around its axis. From above, this whole thing is covered by a hygienic cap. In work, both of them are quite normal, and they are fixed confidently.
The cartridge is fixed with a special latch in the back – it sits tightly, without play. Using such a construct is quite comfortable.
Cartridge of decent capacity. That’s just the level of the filled liquid is problematic to monitor when it remains very little. The filling hole is covered with a silicone plug with a small strap, and you still have to try to pick up the last one. The hole for refueling is of a normal size, but if you insert a bottle with a large nose, it will plug it completely and the liquid will pour out. In such a situation, it is better to just pour or drip on weight. Moreover, to fill the tank to the brim, due to its specific design, you can only if you keep the latter at an angle. All these nuances or nit-picking I am combining in one minus – according to the totality of the episodes, so to speak.
But I liked the airflow adjustment. Firstly, it is external – you do not need to pull out the cartridge for this. Secondly, it is convenient to use, even despite the seemingly flimsy design. Well, and thirdly, I was pleased with the variability. So you can achieve a tight cigarette or a completely through hookah draft. By the way, on a completely covered hole, the suction of excess air is small.
There are two complete evaporators, both of them are made on a grid. Moreover, the difference in resistance is minimal. Frankly speaking, I didn’t quite understand the train of thought of the manufacturer – wouldn’t it be better to put a second coil with sopr in the region of 1.0 for high nicotine fluids – the adjustment of the tightening allows. It can be seen that the manufacturer “ordered” to pile up pretty much and completely forget that in essence it’s still underneath, not a mod) The taste transfer on the non-service is quite nothing for itself, it may not be the brightest of those that I had the chance to try, but definitely worthy. Even in this form, the set can be safely recommended for purchase.
But you obviously didn’t come here for shifts, so then quickly about the serviced base, which, by the way, is sold only separately.
Geekvape Aegis Boost Replacement RBA POD Package Contents
– Aegis Boost Replacement RBA Pod
– additional 510th drip type
– 4pcs pre-wound spirals (unlabeled)
– spare screws
– spare springs
– screwdriver key
As you can see, the package is completely self-worth, such, perhaps, is worth every “cent” . We start with drip types and here is good news at once, even two. The first – in the box there are two of them. Both are probably made of delrin, the throughput seems to be different – as if for MTL and for DDL, naturally, all this is conditional. The second good news is the 510th landing, so you can safely, albeit tightly, screw your favorite drip types. In the work the guys are “great fellows” – everything is at their level.
Cartridges, as far as I know, are identical in refueling, fixing and spaciousness. So all the features and my feelings described above, you can safely try on the serviced base.
We turn to the deck, but first a few words about the dome. The part is metal, though massive. It seems that even the main body outweighs a little, therefore, as expected, it is almost not heated. It is fixed by a threaded connection, risks are provided for convenience. The thread is not long – getting into it is comfortable.
For the lower airflow in response is a whole heap of holes at the bottom of the deck. Such a large-scale event clearly hints to us that small and probably tasty fusion films can easily fit here. Yes, and pressure plates with their spread range echo this fact. By the way, just such specimens rest in the box.
The taste transfer expectedly pleased, I would even say very pleased. Perhaps a pleasant sensation added quality controlled airflow. Here, the liquid ingredients are felt, and saturation can be set by pressing on the puff, just good. By the way, it even seemed to me that the service staff was not bad at all. In short, there’s nothing to argue here – like for all this pleasure.
Well, let’s get even with the main mod – this is also important. The control panel is again made in the tradition of the Aegis line. The fire button in the shape of a trigger is convenient, but as for me, it is small. Not that I immediately drew a minus for this, but this circumstance would add comfort. She presses moderately tight, click average volume. The display is monochrome, the brightness is sufficient, unregulated. The information is small, but quite readable. The control keys, like the fire button, metal – behave decently.
The built-in battery is of rather good capacity, moreover, it does not plan to charge especially long – only about an hour. Soaring at this time is not forbidden. The connector of the “old model” settled on one of the sidewalls. It is naturally covered with a silicone plug, and again it has a short whip that is difficult to pick up.
In the work, the mod proved to be quite confident. The resistance reads clearly – the error is minimal, in terms of power, it does not seem to be cheating. I also liked how the mod consumes charge, especially on the service staff – moderately “ate” on my 0.7Ω. Functionality, like that of competitors, is simple – a variable speed in 0.5W steps. You can also turn on / off the mod, lock the adjustment keys and reset the puff counter.
Something I was even tired of drawing sabzh pluses. What can I say – the expected cool little thing, it is quite possible that this is the contender for the title of best pod of the outgoing year. He may not have everything perfect, but it’s absolutely absolutely fine. Here you have the design, and ergonomics, and a convenient serviced base, and protection against moisture, and a decent workmanship, and even a decent taste transfer. What else do you need?
And I’ll even call the price tag acceptable, because it’s not a pity to pay such an amount for this device – even if you have to buy RBA separately. Therefore, I recommend it unequivocally and irrevocably – I’m sure it will not disappoint you.
- Price, as soon as sub-mode, and together with RBA
- Protection against moisture, dust and wear
- Variation in tightening and design
- Availability of a serviced base, albeit sold separately
- Relatively fast charge
- Cartridge Capacity
- Drip types 510th landing on RBA
- RBA is served right on the sub-mod
- Decent flavor on interchangeable coils, and even more so on RBA
- Unmarked spirals in RBA kit
- Easily soiled
- Cartridge Refill Nuances
- Short straps on silicone caps