The second in line will be a kit from Gas Mods. we have the first experience in mod building, and again the beginning was laid in the starting segment. Well, then – we will get to know each other, especially since the device is offered somewhat extraordinary.
Gas Mods Mars POD System
Dimensions: 81 x 33.5 x 17mm
Case material: metal + plastic
Power: built-in 750mAh
Cartridge capacity: 2.0ml
Evaporator resistance: 1.5 / 1.8Ω
Output power: 10 – 15W
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
Micro-USB port / charging: yes, charging current is unknown
Color: see photo below
– Mars mod
– replaceable cartridges 2pcs 1.5 ss316L / 1.8Ω NI80 (one preinstalled)
– USB cable
– bottle for gas stations
– user manual
– warranty card
The appearance of our guest is original – I won’t say that the novelty directly attracts glimpses, but there is certainly a certain share of attractiveness. Most likely, this feeling is caused by the aesthetics of minimalism – the lack of vulgar decor, and the form factor is quite interesting.
Dimensions are not the largest – stealth may well take place.
From the start, the developers offer a good palette of designs – here you will find a calm classic and funny colorful specimens.
Replaceable cartridges are offered in two versions – they differ in resistance and material of the built-in evaporator. The capacity of the tank is standard, it will refuel on the side. It will have to be removed from the main body for this procedure. All this “composition” is fixed with a magnetic connector.
The control panel is rich only in a small fire button, it is surrounded by an LED indicator. In addition to its main function – an indication of the remaining battery charge – the latter can report on the selected output voltage mode. In total, the developers envisaged four such.
The built-in battery for such dimensions is probably quite good in capacity. The connector for charging it is located at the bottom of the device, however, the developers forgot to tell the charging current.