Oasis Kit, a compact and portable pod system kit, comes with 2ml e-juice capacity with side filling design. And due to its double anti-leaking structure, it will give you convenient and comfortable vaping experience. Powered by 360mAh built-in battery with USB Type-C port, it can be quickly charged around 40 minutes. And it supports 1.2ohm A1 cotton coil, which will bring you pure flavor. Besides, it utilizes bottom airflow control to meet your individual demands better.
Dimensions: 111 x 21mm
Case material: aluminum alloy + plastic
Power: built-in 360mAh
Cartridge capacity: 2.0ml
Evaporator resistance: 1.2Ω
Output power: unknown
Operating mode: POWER
Protection:Low / high resistance, overheating, short-circuit, overcharge / overdischarge
Connector Type: Magnetic
Shield / diagonal: No
Micro-USB port / charging is: eat, Type-C, the charging current of about 0.5A
Color: see photo below
– Oasis mod
– replaceable cartridge 2pcs 1.2Ω (one preinstalled)
– USB Type-C cable
– user manual
– warranty card
The new set looks completely gray – the form factor is simple, the decor is zero. It’s immediately obvious that the developers didn’t want to bother, and rolled out the device simply filling their assortment line. Perhaps this can be forgiven for the guys, because they started practicing in this segment relatively recently, and have only two such proposals.
From the start, developers offer a line of five color schemes – it’s not bad at all.
Replaceable cartridge of standard capacity, it is refilled on the side. Before refueling, it will naturally have to be removed from the main body. The built-in evaporator is made on organic – cotton – designed, of course, for liquids with a high content of nicotine, including salt.
Traditionally, blowing adjustment is not provided for such a construct; the reservoir is fixed by magnets.
The main body is equipped with a built-in battery of rather small capacity. However, there are still pleasant moments – this is the charging current. The developers promise that the edges of the battery will be filled in about 40 minutes. The causal Type-C connector is located at the bottom of the device.
Negligent developers forgot to tell how the device will be activated. The central place of the front side is allocated to the LED indicator, inside of which a small circle is visible. Presumably, the device still starts by tightening – the fire button is very small, if in the end it turns out to be it. With this outcome, I can say that using such a small fry will be very inconvenient.