Today HQD Looper Aio Kit Review,which does not visit our portal so often, but still. As you must remember, this team specializes exclusively in the starting segment – pod – the novelty presented today is no exception. However, it is worth noting that according to its “status” this project should be called almost the largest in the entire history of the manufacturer, although in fact the device turned out to be very simple.
HQD Looper AIO
Dimensions: 92 x 42 x 20mm
Case material: aluminum alloy + plastic
Power: built-in 1200mAh
Cartridge capacity: 3.5ml
Evaporator resistance: 0.6 / 1.2 / 1.4Ω
Output power: 10 – 20W
Voltage range: 3.2 – 4.2V
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
Micro-USB port / charging: yes, charging current is unknown
Color: see photo below
– Looper mod
– replaceable cartridge (pre-installed)
– replaceable evaporators 2pcs 0.6 / 1.2Ω (one pre-installed)
– USB cable
– user manual
– warranty card
A removable cartridge of decent capacity, it will refuel from the bottom. There is a causal hole covered by a check valve. A slot is visible on the back to control the level of the charged fluid. The drip type is removable, but not the 510th.
The main body has a large fire button located on the front end. According to the developers, it is surrounded by an LED indicator.
Our hero eats from the built-in battery of not the worst capacity. And here again, as in the first case, the charging current of the latter is not known for certain.
The developers did not provide for power adjustment – the device focuses in this regard on the resistance of the installed evaporator.